Finance explained

Loan to value explained for business borrowing

Loan to value shows how much a lender advances compared with the worth of the asset securing the loan. It sets the ceiling on most property-backed business borrowing, and a down-valuation can move that ceiling a week before completion.

The Capzy teamBusiness finance brokers
Updated 7 min readChecked against official sources
Capzbara, the Capzy mascot, weighing a small model building against a stack of coins on a brass balance scale
The short answer

Loan to value (LTV) is the loan amount divided by the value of the asset that secures it, shown as a percentage. A £120,000 loan against a property valued at £200,000 is 60% LTV. Lenders use it to cap how much they advance, and the remaining 40% is the cushion that protects them if the asset has to be sold.

At a glance

Formula
Loan amount divided by asset value, as a percentage
How the British Business Bank describes it
The lender advances a certain percentage of the security value
Where it is used
Secured finance such as bridging loans and commercial property finance
Commercial bridging maximums published by lenders we list (checked October 2026)
Commonly 70% of value
Security, in the British Business Bank’s glossary
Typically required by lenders against a loan, such as premises or plant equipment

What is loan to value?

Loan to value, usually shortened to LTV, is the size of a loan compared with the value of the asset that secures it. The British Business Bank puts it this way for bridging loans: the lender advances a certain percentage of the security value, which is known as the loan-to-value ratio.

The asset is the security, also called collateral. The British Business Bank’s glossary describes security as something typically required by lenders against a loan, such as premises or plant equipment. LTV is the measure of how much of that asset’s value the lender is putting at stake.

A lower LTV means the debt is a smaller slice of the asset’s value. A higher LTV means the debt is closer to the whole value, and there's less left over to cover sale costs and any fall in price if the lender has to sell.

How do you calculate loan to value?

To calculate loan to value, divide the loan amount by the value of the asset securing it and multiply by 100: LTV = loan ÷ asset value × 100. A £120,000 loan against a property a lender values at £200,000 is 60% LTV. The value used is the one the lender accepts; some lenders publish that they use the lower of the purchase price and their valuation.

Illustration: loan to value for an imaginary property
ItemAmount
Value of the property£200,000
Loan requested£120,000
Loan to value£120,000 ÷ £200,000 × 100 = 60%
Equity left in the property£80,000
About this example

These are round, made-up numbers chosen to show the arithmetic. They are not a typical LTV, a limit or an offer from any lender.

The same sum works the other way round. If a lender will advance a set percentage of the value, multiply the value by that percentage to find the most it would lend, before it considers anything else about the business.

What a down-valuation does

Say you agree to buy a unit for £200,000 and need £140,000 at a 70% maximum LTV. The lender's valuer puts it at £180,000. At 70% of £180,000 the most it will advance is £126,000, so you need to find another £14,000, renegotiate the price, or walk away. That gap is the most common way an LTV limit bites late in a deal.

Why do lenders use loan to value?

Lenders use loan to value to see how much room there is between the debt and the asset’s value if the loan is not repaid and the asset has to be sold. The more room there is, the more of the sale price is available to clear the debt after costs.

LTV is one input. A lender will also look at whether the business can afford the repayments, how long it has traded and the borrower’s credit history. A low LTV does not make a weak business a good risk, and a higher LTV is not automatically a refusal.

What is the maximum LTV for a business loan?

There's no single maximum: each lender sets its own by product and property type. Among the lenders in our directory that publish a figure, commercial bridging maximums sit around 70% of value, residential bridging goes up to 75% or 80%, and second-charge loans are lower. The table shows what each lender published on its own website when we checked it in October 2026.

Maximum LTVs published by lenders in the Capzy directory (lenders' own figures, checked October 2026; not an offer)
LenderProductPublished maximum
Black & White BridgingCommercial bridge70% of 180-day value, or 55% for land with planning
GlenhawkCommercial bridging70% LTV
Rocket BridgingResidential / commercial / second charge bridging75-80% / 70% / 65% residential and 55% commercial
Mercantile TrustHomeowner business loan (second charge)75% LTV
RAW Capital PartnersTerm loans for UK residents70% LTV
Goldentree Financial ServicesDevelopment finance (residential / commercial)70% / 75% LTGDV, up to 90% loan to cost
How to read this table

These are the highest figures each lender publishes, not what any particular deal will get, and lenders change them. Listing a lender here is not a recommendation or a ranking. Check the lender's current criteria before relying on a number.

Why might you be offered less than the maximum LTV?

Because LTV is only one of the limits on a loan, and the lowest limit wins. On a commercial mortgage or a buy-to-let loan the lender also checks that the rent or the business's profit covers the interest by a margin it sets; our guide to the interest cover ratio explains that test. If the property is cheap relative to its income the LTV cap bites first. If the rent is thin, the income test does, and the loan can come out well under the headline LTV.

Lenders also trim the maximum for riskier security: land, specialist buildings, second charges and properties needing work tend to carry lower published limits than a standard let property. If you're buying through a company, our guide to a buy-to-let limited company covers the set-up side.

Which types of business finance use loan to value?

Loan to value is used wherever a loan is secured on an asset whose value can be measured, most often property. It is less relevant where there is no single asset behind the loan.

Where loan to value comes into business finance
Type of financeDoes LTV apply?What it is measured against
Commercial mortgagesYes, usuallyThe value of the commercial property being bought or refinanced
Bridging loansYesThe value of the security, which the British Business Bank says sets the percentage advanced
Asset financeOften, in a different formThe asset being financed, such as a vehicle or machine, which the lender can usually recover if payments stop
Unsecured business loansNoThere is no asset to value; the lender relies on the business’s finances and sometimes a personal guarantee
Invoice financeNot in the same wayLenders advance against invoices, so the measure is the value of the invoices rather than LTV

Our guide to secured business loans covers the wider range of loans backed by property or other assets. Where a loan is secured on a company’s assets through a charge, our guide to what a debenture is explains how that security is recorded.

What changes your loan to value?

Your loan to value changes whenever the loan or the asset’s value changes.

  • The loan amount. Borrowing less, or paying the loan down, lowers the ratio.
  • The valuation. A lender normally relies on a valuation it accepts. A lower valuation than you expected raises the ratio for the same loan.
  • The deposit or equity you put in. The British Business Bank describes a commercial mortgage as a loan that involves paying a deposit followed by monthly repayments. A bigger deposit means a smaller loan against the same property.

Costs such as legal and valuation fees are usually separate from the loan itself, so check what a lender counts when it quotes a percentage. Ask whether the figure is based on the purchase price or on its own valuation.

What happens if the asset loses value?

If the asset loses value, the loan becomes a larger share of it, so your LTV rises even though you have not borrowed more. How that matters depends on the terms of your agreement.

Some agreements allow the lender to ask for more security or a part-repayment if the value falls below a set level. Others do not. Read the clause before you sign and ask the lender in plain terms what would happen if the value dropped.

Secured means at risk

A secured loan puts the asset at risk if you cannot keep up repayments, and a lender may also ask a director for a personal guarantee. Read our guide to personal guarantees for business loans before you agree to one.

How is loan to value different from loan to cost and gearing?

Loan to value compares a loan with the asset’s value, loan to cost compares it with what the project costs, and gearing compares total debt with the business’s own funds. They answer different questions, so check which one a lender means.

Loan to cost is mainly used in property development, where the asset does not yet exist in its finished form. Development lenders pair it with loan to gross development value (LTGDV): the loan as a share of what the scheme should be worth when finished. A lender quoting 90% of costs and 70% of GDV applies whichever produces the smaller loan. Our guide to development finance works through both. Gearing looks at the whole balance sheet rather than one loan.

How can you improve your loan to value before applying?

You improve loan to value by borrowing less against the asset or by showing it is worth more, and you cannot change the second without evidence.

  • Put in a larger deposit or use more of your own funds.
  • Reduce the amount you need by phasing the project or finding other funding.
  • Get a realistic valuation early so there is no surprise at offer stage.
  • Offer additional security if you have it, and weigh the risk to that asset first.
  • Keep up repayments on existing secured debt, which lowers the loan as time passes.

Compare the total cost of each route, not only the percentage a lender will advance. Our guide to comparing business loan lenders covers what to line up side by side. Asset-backed lenders are grouped in the directory of secured loan providers.

Capzy is a credit broker paid by the lender, so we don't value property or set LTV limits. What we can do is put your deal in front of lenders whose published limits fit the asset. You can check your funding options with a soft search that does not affect your credit score; a full application may involve a hard search, and any offer is subject to status. Use a solicitor and a qualified valuer where a deal needs them.

Sources

  1. What is a business bridging loan?, British Business Bank
  2. How to finance a commercial property purchase, British Business Bank
  3. Business finance glossary, British Business Bank
  4. Commercial bridging loans, Black & White Bridging
  5. Commercial bridging, Glenhawk
  6. Products, Rocket Bridging
  7. Homeowner business loans, Mercantile Trust
  8. Mortgages: UK residents, RAW Capital Partners
  9. Development finance, Goldentree Financial Services

Capzy is a credit broker, not a lender. We get paid by the lender. This page is general information, not financial, tax or legal advice. Finance is subject to status, lender criteria and affordability; rates and terms depend on your circumstances.

Common questions

Loan to value is the loan amount divided by the value of the asset securing it, shown as a percentage. A £120,000 loan against a £200,000 property is 60% LTV.
Divide the loan by the asset’s value and multiply by 100. The value used is normally the one the lender accepts, which can differ from the price you paid.
A lower ratio means the debt is a smaller share of the asset’s value, which lenders generally view as less risky. It is only one factor, and each lender applies its own criteria, so ask for its current requirements.
No. An unsecured loan has no asset behind it, so there is nothing to value. The lender looks at the business’s finances instead, and may ask for a personal guarantee.
Yes. If the asset’s value falls, the same loan is a bigger share of it. Check whether your agreement lets the lender ask for extra security or a part-repayment in that case.
Loan to value compares the loan with the asset’s value. Loan to cost compares it with what a project costs to complete, and is mainly used in property development.
No. Limits depend on the lender, the product and the asset. Among lenders we list, commercial bridging maximums are commonly 70% and second-charge limits lower, but each lender sets its own.
Loan to gross development value: the loan as a percentage of what the finished development should be worth. Development lenders usually set an LTGDV limit alongside a loan-to-cost limit and lend the lower of the two.

See what you could borrow

Free Funding Score in about 90 seconds, with no impact on your credit score.

Check my options
  • Free
  • No credit impact
  • About 90 seconds